Series 160 Stainless Steel Pitot Tube

ASME Design Meets AMCA and ASHRAE Codes

The Series 160 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. A universal model fits the user supplied 3/4" schedule 40 pipe in any length.

Note: Special shipping and handling charges will apply to pitot tube lengths over 36" for International orders and 72" for Domestic orders.

Download the Air Velocity Calculator App for Android® devices.

Product Applications

  • Monitor or control air velocity or air flow when combined with differential pressure gage, switch or transmitter

Models & Ordering

Filter By

Shipping Information

All shipping times are dependent on product availability at time of shipment.

Although we make every effort to ensure a continuous supply of our products, occasional circumstances may force us to temporarily run out of a product, or have shipping delays. Should this occur, customers will be notified soon after placement of any orders for such products and, if applicable, items will be put on backorder. For orders requiring expedited shipment, our customer service team can be contacted to confirm product availability

Model Description Usually Ships* Price Order
160-12
Ships: Same Day
Price: $121.00
Stainless steel Pitot tube, 5/16" dia., 12-5/8" insertion length. Same Day* $121.00 Order
160-18
Ships: Same Day
Price: $130.00
Stainless steel Pitot tube, 5/16" dia., 18-5/8" insertion length. Same Day* $130.00 Order
160-24
Ships: Same Day
Price: $135.00
Stainless steel Pitot tube, 5/16" dia., 24-5/8" insertion length. Same Day* $135.00 Order
160-36
Ships: Same Day
Price: $154.00
Stainless steel Pitot tube, 5/16" dia., 36-5/8" insertion length. Same Day* $154.00 Order
160-48
Ships: Same Day
Price: $159.00
Stainless steel Pitot tube, 5/16" dia., 48-5/8" insertion length. Same Day* $159.00 Order
160-60
Ships: Same Day
Price: $210.00
Stainless steel Pitot tube, 5/16" dia., 60-5/8" insertion length. Same Day* $210.00 Order
160-8
Ships: Same Day
Price: $118.00
Stainless steel Pitot tube, 5/16" dia., 8-5/8" insertion length. Same Day* $118.00 Order
160-KIT
Ships: Same Day
Price: $569.00
Kit containing 160-18, 160-24, 160-36, 160-48, and FREE carrying case ($150 value) Same Day* $569.00 Order

Features

  • Low sensitivity to misalignment up to 15 degrees
  • No calibration needed due to ASHRAE tip design
  • Silver soldered connections for leak-proof operation
  • 5/16" models rated to 1500°F (815.5°C)

Options

  • Compression Fitting - mounting option for 166/167 Series. Add -CF suffix (166-6-CF).

Accessories

Model Number Description Usually Ships* Price Order
Split flange mounting. Can be added to any Dwyer® No. 160
standard pitot tube. Cadmium plated steel. Gasket is pattern for
mounting holes. Secure flange loosely to tube, adjust tube depth and
tighten screws. Gasket of 1/16 A-158 Split flange mounting. Can be added to any Dwyer® No. 160 standard pitot tube. Cadmium plated steel. Gasket is pattern for mounting holes. Secure flange loosely to tube, adjust tube depth and tighten screws. Gasket of 1/16" Neoprene fits tightly around tube and against duct for leak-proof seal. Nuts, washers included. Same Day $17.50 Order
Mounting gland. Versatile adapter slips on any Series 160, 5/16 A-159 Mounting gland. Versatile adapter slips on any Series 160, 5/16" standard pitot tube made after Dec. 1990. Two-part stainless steel fitting slides over tube and provides permanent, secure mounting. Where duct interior is accessible, use the washers and jam nut supplied. For blind applications or in thicker materials, use model A-156 flange mounting plate. Once tube is adjusted to proper depth and angle, tighten smaller hex bushing to lock position. Graphite bushing inside assures leak-proof seal even at higher temperatures. TFE bushing also available. Note: For full insertion with this fitting, order next longer pitot tube. A-159 mounting gland is used for both duct mounting and flange mounting. Same Day $34.50 Order
Flange mounting plate with 1/2 A-156 Flange mounting plate with 1/2" female NPT. Same Day $20.00 Order
Step drill. For fast, convenient installation of pitot tubes in sheet
metal ducts. No center punch needed; automatic de-burring. Drills
six sizes from 3/16 A-397 Step drill. For fast, convenient installation of pitot tubes in sheet metal ducts. No center punch needed; automatic de-burring. Drills six sizes from 3/16"-1/2" in 1/16" increments. 1-2 Weeks $68.00 Order
Air velocity calculator slide chart. A-532 Air velocity calculator slide chart. 1-2 Weeks $12.75 Order
Hard plastic carrying case for pitot tubes up to 48 A-160-CASE Hard plastic carrying case for pitot tubes up to 48" 1-2 Weeks $262.00 Order

Videos

Product Literature

Manuals

Catalog Pages

Approvals

Drawings

Questions

Question
How do I hook up my Magnehelic® gage for an air velocity application with a pitot tube?
Answer
In our Application Guides on flow products, we explain very well how to take air velocity readings. The total pressure connection on the pitot tube is connected to one of the high pressure ports on the gage. The other high pressure port is plugged. The static pressure connection on the pitot tube is connected to one of the low pressure ports on the gage. The other low pressure port is plugged.
Question
The gland fitting A-159 is shown as an accessory to the Series 160 Pitot tube. How do you install the fitting past the elbow in the tube?
Answer
The optional mounting gland, model A-159, is designed to slide over any Series 160, 5/16” diameter standard pitot tube. It should be large enough to slide past the elbow while still being small enough to tighten down on the 5/16” diameter shaft.
Question
I have a question about the Series 160 Pitot tube. I am wondering whether you can use this as a water flow measurement instead of air flow measurement. Best, Thanks
Answer
Our Series 160 pitot tube is specifically designed to monitor or control air velocity or air flow and not water flow. Our Series DS in-line flow sensors can be used for flow rate sensing of compatible gases and liquids for schedule 40 pipe.
Question
How do you do traverse readings with a Pitot tube for air velocity and air flow readings?
Answer
Dwyer has a guide on how to calculate air velocity and air flow with Pitot Tubes including traverse readings located on our website at: Air Velocity Measurement

Photo Downloads

You must be logged in to view this content.
Click here to login to your account.

Apps

Product Reviews

Only registered users can write reviews. Please Sign in or create an account