Model
Number | Description |
| A-298 |
Flat aluminum flush mounting bracket. |
| A-299 |
Surface mounting bracket. |
| A-300 |
Flat aluminum flush mounting bracket. |
| A-351 |
Pinch clamp to seal rubber tubing, as in a leakage test. |
| A-352 |
Magneclip, slip on magnetic holder for acrylic plastic gage, per pair. |
| A-353 |
Magnetic mounting, flat style, secures to flowmeter, etc. with no. 6-32 machine screw and boots insert. |
| A-354 |
Magnetic mounting, edge style, secures edge of acrylic manometer with No. 10-32 machine screw and boots insert. |
| A-356 |
Gage plug with retainer loop, polyethylene plastic, for 1/4" ID tubing, slip loop over tubing OD and insert plug for seal. |
| A-357 |
Thermometer and terminal tube holder, stainless steel wire. |
| A-362 |
Stand-hang bracket, aluminum, for Minihelic® II gage. |
| A-363 |
Scale clamp bar for No. 1221 manometer. |
| A-364 |
Magnet assembly for No. 1221 manometers, 2 required (3 required for 1221-36 and M-1000). |
| A-366 |
Manometer cleaning brush, 1/4" OD x 2-1/8" long, attach to wire for use. |
| A-368 |
Surface mounting plate, aluminum, for Magnehelic® gage. |
| A-369 |
Stand-hang bracket, aluminum, for Magnehelic® gage. |
| A-370 |
Mounting bracket. |
| A-371 |
Surface mounting bracket, use with Photohelic® switch/gage on horizontal or vertical surfaces, also for Capsu-Photohelic® switch/gage on vertical only. |
| A-395 |
Surface mounting bracket for Series 602/603 transmitters and Series 4000 Capsuhelic® gages, steel with gray hammertone epoxy finish. |
| A-397 |
Rugged step drill, quickly provides true round holes in thin materials, no center punch needed to start, automatically de-burrs drilled hole, high speed steel, drills 3/16" through 1/2" holes in 1/16" increments. |
| A-464 |
Flush mount kit for Magnehelic® gages. |
| A-465 |
Flush-mount space pressure sensor. |
| A-497 |
Surface mounting bracket for Minihelic® II gage, steel with satin black finish. |
